Bottom Roller for Both Ring Frames
Compact bottom roller for both ring-frame configurations.
View details9 supplied photos
Textile Bottom Rollers, Fluted Rollers & Knurled Rollers
Vindex Industries manufactures textile bottom rollers with fluted or knurled working profiles. Browse ring-frame, simplex, drawing, compact and comber roller references below. Select the process and roller position, then send the machine model, working diameter, overall length and end or coupling details for a quotation.
Select product
Individual product pages
Compare bottom rollers for comber, compact, drawing, simplex and ring-frame applications. Select the required working profile and frame position, then review the individual roller page. Include the roller drawing, coupling or end details, quantity and machine reference when requesting a quotation.
Drawing-based selection
Knurled Roller / Knurled Bottom Roller
Specify the working-surface pattern, roller dimensions, bearing seats and end coupling for the required machine position.
View knurled roller detailsBottom Rollers for Different Drafting Processes
Vindex Industries manufactures textile bottom rollers in Surendranagar, Gujarat. Choose the machine process first: ring spinning, roving / speed frame, drawing, compact spinning or combing. Then identify the roller position, working surface and end connections from the installed part.
Fluted and knurled describe working-surface profiles. They do not define a universal machine fit or a common diameter. The same process can use different roller sections, so the enquiry should include a drawing, machine model and quantity for each reference.
Use the process table below to open the relevant product page. The fluted roller page retains the existing DJ reference data; the other process pages explain the dimensions and configuration needed for their own enquiries. For inspection guidance, read the bottom roller maintenance guide.
Knurled Roller / Knurled Bottom Roller
Knurled rollers are identified by the working-surface pattern as well as the roller body and end geometry. For a quotation, provide the original roller reference or a drawing showing working length, outside diameter, knurl pattern, bearing seats and coupling ends. A similar overall length does not establish that two rollers are interchangeable.
State the machine make, model and drafting position, and specify whether a complete roller or a component is required. The agreed drawing defines the supplied profile; no single diameter, material or tolerance is asserted for every machine.
Request a knurled roller quotationSpinning Bottom Roller
A spinning bottom roller is part of the drafting system in a spinning frame. Identify the front, middle or back position and the working surface, end coupling and bearing arrangement when selecting a replacement. Fluted and knurled references should be specified separately.
For ring-frame enquiries, open the Ring Frame Bottom Roller page and send the machine reference with a drawing, sample photographs and required quantity. Draw-frame, comber and simplex rollers remain separate range selections.
View Ring Frame Bottom RollerFind Bottom Rollers by Machine Process
Vindex Industries is a textile bottom roller manufacturer in India. Use the machine process to choose the relevant product page, then compare its roller dimensions and working profile. The table below keeps different machine duties separate.
| Machine process | Product details | Information for quotation |
|---|---|---|
| Ring frame / spinning bottom roller | Ring Frame Bottom Roller | Front, middle or back position; roller length and coupling |
| Roving frame / speed frame / simplex bottom roller | Roving and Speed Frame Bottom Roller | Drafting arrangement, working diameter and end details |
| Draw frame / drawing bottom roller | Draw Frame Bottom Roller | Machine model, roller position and bearing-seat dimensions |
| Comber bottom roller | Comber Bottom Roller | Comber model and original roller drawing |
| Compact spinning bottom roller | Compact Spinning Bottom Roller | Frame model and compact-system configuration |
| Textile fluted bottom roller | Spinning Fluted Bottom Roller | Flute profile, pitch and working length |
| Knurled bottom roller | Knurled Roller Selection | Knurl pattern, body dimensions and journal details |
For LMW, Rieter, Zinser, Marzoli or Toyoda / KTTM bottom roller enquiries, include the complete machine model and the original roller reference. These names identify the enquiry; the agreed drawing defines the roller supplied. Roller bearings are a separate component: see the bottom roller bearing range.
Textile Bottom Rollers — Frequently Asked Questions
What is the difference between fluted and knurled bottom rollers?
Fluted and knurled rollers have different working-surface patterns. Specify the installed profile, pitch and working-zone layout from the original roller or drawing.
Where are bottom rollers used?
The Vindex range covers roller enquiries for ring spinning, roving or simplex frames, draw frames, compact spinning and combers. Select the machine process and roller position together.
Does the range use one common specification table?
No. Machine-specific rollers need their own geometry. The fluted roller page lists existing DJ reference data; the process pages identify the drawing dimensions needed for selection.
What should I check when a bottom roller is worn?
Inspect the working surface, journals, bearing support and coupling against the machine maintenance instructions. Record observed wear and identify the original roller reference before requesting a replacement.
What is needed for an export or bulk quotation?
Send the machine make and model, roller position, drawing or original part reference, quantities by reference and destination. Vindex can then prepare the product enquiry for the required configuration.
Which page covers roving, speed frame and draw frame bottom rollers?
Use the Simplex Frame Bottom Roller page for roving frame and speed frame roller enquiries. Use the Drawing Frame Bottom Roller page for draw frame rollers.
Choosing a bottom, fluted or knurled roller
A textile bottom roller is selected by its working profile, journal and coupling dimensions, not only by its overall appearance. Identify whether the replacement is for a ring frame, simplex or another drafting arrangement. Keep the front, middle and back roller positions separate when their profiles differ.
Provide the roller diameter, total length, working length, journal sizes and end connection details. Include photographs or a dimensioned drawing of the flute or knurled profile. If the bearing support also needs replacement, review the bottom roller bearing range separately so that the roller and support references can be checked together.