Ring spinning / compact frames
Spindle assemblies and drafting or spindle-drive components.
Find parts by machine
Find textile spinning machinery spare parts by process, then open the product range for its photographs, model references and enquiry details.
Roving / speed frame / simplex
Flyer assemblies, separate pressure fingers and drafting rollers.
Draw frame
Bottom rollers for the draw-frame drafting position.
Comber
Bottom roller enquiries for the installed comber position.
Winding / yarn preparation
Choose by bearing or spindle reference and the installed assembly.
Ring doubling / ring twisting
Plug-type, bare-blade, heavy-duty and extra-heavy-duty configurations.
Two-for-one twisting / TFO
Select the machine make, full model and threading arrangement.
For a quotation, identify the installed machine model and the original part or assembly reference. Product drawings and dimensions define the required configuration.
Ring-frame spindle ranges by machine make
Open a machine-builder spindle range, then select its listed assembly. Model references remain in the matrix below.
Use this matrix as a product-selection guide. Machine makes and models are reference examples, not a guarantee that every Vindex part fits every listed machine. Confirm the exact assembly against its drawing, dimensions, OEM part number or master sample before quotation. Performance limits and materials depend on the selected variant.
Rieter
LMW
Zinser
Marzoli
Toyoda / KTTM
Suessen
Allma
Giesse
Huzur Makina
Ishikawa
Muratec
Veejay Lakshmi
Volkmann
Murata
Schlafhorst / Saurer
SACM
Howa
Jayalakshmi Machine Works
Meera
Lakshmi Narayan Industries
JC
Product Selection & Machine Reference Matrix
| Product Category | Machine Makes & Model References | Technical Specifications & Parameters | Key Features & Metallurgy |
|---|---|---|---|
| Textile Spindle For Ring Spinning Machine | LMW: LG5/1, LR6/A/AX, LR7/LR8, LR9 SX/AX, LRJ9, LR60/LR90. Rieter: G5/1, G10, G30/G32/G33/G35/G36/G38; K44/K45/K47/K48. Zinser: 319/321/350/351/451, Impact FX 551, 720. Toyoda / KTTM: RX 100/200/240/300, RXI. Marzoli: MDS1/2/7/9, MP1, Galileo. Other references: Suessen, Texmaco, Textool, MMC. | Type: Aluminum plug / duralumin sleeve; spring-loaded or button gripper, Tube-length references: 180 / 190 / 200 / 210 / 220 / 230 mm. Wharve references: 18.5 / 19 / 20.2 / 22 mm. Insert references: HF 100 / HF 1 / HF 21 / CS 1 / HZ 33— | Ring / compact spinning spindle selection. Balance-grade requests: G 0.4 / G 1.0, subject to agreed standard, rotor configuration and test speed. Permitted RPM and energy performance depend on the complete assembly; balance grade does not imply zero vibration. |
| Spindle Bolsters & Inserts | Rieter: G33, G35, G38 LMW: LR6, LR9 series Zinser: 351, 451 Impact FX Marzoli & KTTM Ring Frames | • Insert Design: Heavy-duty spherical footstep • Oil Viscosity: ISO VG 10 / VG 12 compatible • Clearance: Micron-level hydraulic tolerances | • Rapid vibration suppression under full bobbin load • Extended oil change intervals (up to 4,000 hrs) • Anti-wear special alloy steel bolster housing |
| Ring Doubling / Ring Twisting Spindles | Indian references: Veejay Lakshmi; LMW DJ 50 / LR 50; Texmaco; Textool DT / DJ; Aawadhkrupa, JMW, Minarva. Other enquiries: Lezzeni TBR / CL / BR; Galan; Rieter / Scragg; Michele Ratti; Ishikawa; Murata; Huzur. | Identification references: HZ 55 / 66 / 68 / 77. Customer enquiry ranges: Package 0.5–1.5 kg; neck journal 8.8–11 mm; ring diameter 50–140 mm. | Heavy-yarn / thread twisting applications. Choose blade, bearing and damping arrangement for package load and operating speed. |
| Woolen / Worsted / Jute Ring Spinning Spindles | Woolen / Worsted enquiries: LMW, Textool, Texmaco, Jawa / Pradeep; Gaudino, Zinser, Cognetex / San Giorgio, Bigagli, O.M.B. Jute enquiries: Lagan, Texmaco, regional machinery suppliers; James Mackie, Golden Eagle. | Woolen / Worsted reference range: HZ 44 / 55 / 68; ring 60–90 mm. Jute reference range: HZ 68 / 77; ring 90–140+ mm. | Spindles for selected long-staple and heavy-yarn applications. Blade, neck bearing, footstep and damping depend on package weight and duty. Ring-frame and flyer-frame spindles require separate selection. |
| Pressure Fingers | Speed-frame references: LMW LF 1400/1400A/1465/1660/4200; Rieter F10/F11/F15/F30/F33/F35/F40; Zinser 660/668/670; Toyoda / KTTM FL 12/14/16/100/200; Marzoli BC16/BC20/FT1/FT6/FT7; Electro-Jet, Texmaco, MMC, Howa. | Flyer types: Aerodynamic, steel-clad / slotted, open-leg or closed-leg. Bobbin-size references: 12 × 5, 12 × 6, 14 × 6, 16 × 6 in. Check: Mounting, arm profile, contact surface and matched mass. | Helps control roving winding tension and bobbin density. Material / finish: Aluminum alloy or steel; polished contact path or anodised aluminum, Mass matching, balancing and permitted flyer speed require assembly-specific confirmation. |
| Precision Bottom Fluted Rollers | Ring frames: Rieter G5/1, G30–G38, G60/G70; LMW LG5/1, LR6–LR9, LRJ9/LR60; Zinser 319/321/350/351/451/720; Marzoli MDS / MP1; Toyoda / KTTM RX; Suessen, Texmaco, Textool, MMC. Roving: LMW LF 1400/1465/1660/4200; Rieter F10/F11/F15/F30/F35/F40; Zinser 660/668/670; Toyoda FL. Draw-frame enquiries: Rieter RSB-D; LMW LDF; Trutzschler TD; Vouk / Marzoli | Diameter references: 25 / 27 / 30 mm. Profiles: Straight, helical or knurled, Drawing targets: Surface hardness 58–62 HRC; TIR ≤ 0.01 mm, | Precision drafting rollers for sliver / roving control. Confirm flute pitch, working length, coupling, bearing seats, material and heat treatment. Finite runout tolerance does not guarantee zero vibration or a specific yarn U%. |
| Bottom Roller Bearings | Ring frames: Rieter G5/1, G30–G38, G60/G70; LMW LG5/1, LR6–LR9, LRJ9/LR60; Zinser 319/321/350/351/451/720; Marzoli MDS / MP1; Toyoda / KTTM RX; Suessen, Texmaco, Textool, MMC. Roving: LMW LF 1400/1465/1660/4200; Rieter F10/F11/F15/F30/F35/F40; Zinser 660/668/670; Toyoda FL. Draw-frame enquiries: Rieter RSB-D; LMW LDF; Trutzschler TD; Vouk / Marzoli | Catalogue family: UL Check: Bore d, OD D, width / L, collar, roller-stand width and locating cap / clip. LZ, RNAO, NAO and HK references require separate drawing review; roller-body OD alone does not identify the bearing. | Supports fluted rollers for smooth, controlled rotation. Sealing, lubrication, alignment capability and runout tolerance depend on bearing design. RNAO has no inner ring; NAO includes an inner ring. These are not automatic UL substitutes. |
| Jockey Pulleys & Tension Pulleys | Ring frames: LMW LG5/1, LR6–LR9, LRJ9/LR60; Rieter G5/1, G10, G30–G38; Zinser 319/321/350/351/451; Marzoli MDS; Toyoda / KTTM RX; Suessen, Textool, Texmaco, MMC. TFO: Veejay Lakshmi VJ 120/150/160/190; Volkmann VTS / CompactTwister; Murata 363/368; Huzur, Mihan. Other enquiries: Ring doublers—LMW, Textool, Galan, Lezzeni; rotor machines—Rieter / Schlafhorst. | OD references: 70 / 75 / 80 mm. Bearing: Deep-groove ball bearing; 2RS sealing Check: Face width / profile, bore, mounting and belt type. | Maintains spindle-tape / drive-belt tension. Options: Polymer or aluminum sheave; crowned face; zinc-plated metal parts or anodised aluminum, as specified. |
| TFO & Specialty Twisting Spares | Allma (Saurer), Schlafhorst (Saurer), Veejay Lakshmi, Murata (7-2, 7-7), Meera Turkish Machinery: Huzur Makina, Milhan Makina, Birko AS Italian / Specialty: Giesse (Fancy Yarn), Ishikawa | • Speed: Engineered for continuous twisting speeds • Components: Pots, spindles, flyers, capsules, cutters | • Wear-resistant ceramic eyelets and guides • High mechanical endurance against synthetic & blended yarn wear • Direct drop-in OEM replacement |
| TFO Spindle Bolsters | India: Veejay Lakshmi VJ 120/150/160/190/216; Prerna, Himson, Meera. Global: Volkmann VTS 07/08/09; Saurer CompactTwister / CableCorder; Murata 363/363-II/368; Savio Geminis / Cosmos; Ratti, Giesse. Other references: Huzur, Mihan, Birko, Ishikawa. | • Speed: Up to 10,000 rpm • Lift: Up to 250 mm • Wharve Diameter: 25.4 mm and above • Ring Diameter: 2.5 / 3 inch • Neck Bearing: 20 / 24 / 28 mm (specifications from the Muratec 363 variant page) • Bolster Models: HZ-3C, HZ-33, HZ-44, HZ-55, HZ-66, HZ-68, HZ-77 Identification: HZ 55/66/68/77; pot-size references 120/140/160/180/200 mm. | • EN-31 / AISI-52100 blade steel • Vibration up to 0.05 mm/sec · noise up to 75 dBA • Dynamically balanced — holds the wharve dead-centre and runs cool under continuous load • Built to the original machine geometry — direct replacement fit • Complete set with flange, nut and spindle lock |
| Winding Bearings | Muratec: Process Coner II Rieter: Autoconer X6 Savio: Proxima Smartconer Bearing matched to the exact machine model, OEM part number or sample before quoting — fit is machine-specific | • Function: Support rotating winding components — drums, spindles and traverse mechanisms • Designations: 16 WB references, e.g. WB-16-7.5-20-40, WB-19-9-22-34 • Selection: Match the assembly reference to the machine requirement; confirm mounting dimensions, fit and operating limits before ordering | • Interchange codes are a matching reference, not a guarantee of fit • Send the bearing designation, machine model, dimensions and a clear sample photograph for exact matching • For winding machines and yarn package preparation |
| Top Rollers | Ring: Rieter G5/1, G30–G38, G60/G70; LMW LR6–LR9, LRJ9/LR60; Zinser 319/321/350/351/451/720; Marzoli MDS / MP1; Toyoda / KTTM RX / RXI. Roving: LMW LF 1400/1465/1660/4200; Rieter F10/F11/F15/F30/F35/F40; Zinser 660/668/670; Toyoda FL. Other enquiries: Rieter / LMW / Trutzschler draw frames; Suessen EliTe, Rieter compacting systems, Rotorcraft RoCoS. | Series: LP 1002 / LP 1003; other LP references Arms: PK / HP-A / RT — match full reference. Check: Gauge, cot seat, length, roller position and runout. | Precision arbour, antifriction bearings, fibre-fly protection and cot mounting. Material, hardness, tolerance and lubrication depend on selected variant. |
| Cam Follower Bearings | Ring / Roving: Rieter, LMW, Zinser, Marzoli, Toyoda / KTTM, Electro-Jet. TFO: Veejay Lakshmi, Volkmann / Allma, Murata, Huzur, Agteks. Winding: Muratec, Schlafhorst, Savio. Weaving / Knitting: Staubli, Picanol, Toyota, Tsudakoma, Itema, Mayer & Cie, Terrot, Santoni, Fukuhara, Monarch. | Series references: KR / KRV, CF / CFH, NUKR / PWKR. Check: Roller OD, width, stud / thread, load and lubrication. | Stud-type track rollers for cam guidance and lifting / traverse mechanisms Series are not automatic interchange equivalents. |
| Regional & Custom OEM Components | Jayalakshmi Machine Works (JMW), Minarva, Aawadhkrupa, Lakshmi Narayan Industries (LNI) & bespoke drawing parts | • Built strictly per client engineering drawings or physical master samples | • 100% dimensional inspection reports • Batch traceability & corrosion-protected export packaging |
Compatibility varies by model. Confirm dimensions or part number before ordering.
Export Packaging & Quality Compliance Standards
Inspection Protocols
Agree the inspection plan with the quotation. Runout, balancing, hardness, material and crack-detection reports depend on the component and specified requirements.
Corrosion Protection
Confirm rust-preventive treatment and VCI packaging requirements for the component and transit conditions.
Shipping Standards
Confirm packaging type and any required wood-treatment documentation for the destination and shipment.
Need components for custom drawings or discontinued models? Request Custom Drawing Match
Machine Compatibility — Frequently Asked Questions
Which machine brands are Vindex spares compatible with?
The matrix lists machine makes and model references relevant to the product families. It is a selection guide; exact part-to-machine fitment must be confirmed separately.
How do I confirm a part fits my machine?
Send the machine make and model, OEM part number or bearing reference, mounting dimensions and a clear drawing or master sample. The Vindex team must confirm the selected assembly before quotation.
Do you make parts for machines not listed in the matrix?
Custom parts can be reviewed against customer drawings or master samples. Manufacturing feasibility, material, tolerances and acceptance requirements are confirmed with the quotation.
Are Vindex spares direct replacements for OEM parts?
Direct replacement fit can be confirmed only for a verified assembly reference and machine configuration. A brand or model name alone is not sufficient to establish interchangeability.
Replacement and rebuild field notes
Read the existing Vindex field notes, then open the product named in the case.